Informative Support Links for

1. **Boat docks and marinas**: Fiberglass coatings provide protection against saltwater corrosion, UV rays, and wear from constant exposure to the elements.

2. **Decks and railings**: They help create a waterproof, durable surface that can resist damage from salt spray, moisture, and harsh weather conditions.

3. **Seawalls and bulkheads**: Fiberglass is applied to reinforce and protect these structures from erosion and constant wave impact.

4. **Roofing systems**: It's used to coat flat or sloped roofs to provide a weather-resistant, long-lasting surface.

5. **Pools and water features**: Fiberglass coatings help maintain a watertight seal in pools, fountains, and other water features, protecting them from corrosion and leaks.

6. **Outdoor furniture and fixtures**: Fiberglass is often used to coat or reinforce outdoor furniture and fixtures to improve longevity in salty, humid environments.

 *Aggregate:   Crushed stone, gravel, or sand used in concrete, pavement, and other building materials as a foundation or filler.
  *Architectural Drawings:   Visual plans that detail the design, dimensions, and specifications of a construction project.
  *As-Built Drawings:   Drawings that show the project as it was actually built, reflecting any changes made during construction.
  *Backfill:   Material used to refill an excavation around foundations, utilities, or other structures.
  *Blueprint:   Traditional term for construction drawings, now often digitally produced, detailing structural and design elements of a project.
  *Building Code:   Regulations established by a government or building authority to ensure safe construction practices and standards.
  *Concrete:   A mixture of cement, aggregate, and water that hardens into a solid structure. Used for foundations, walls, and more.
  *Change Order:   A written document that modifies the original construction contract in terms of work scope, time, or cost.
  *Contractor:   The individual or company hired to oversee and execute the construction project.
  *Drywall:   Panels made from gypsum plaster pressed between two sheets of paper, used to create walls and ceilings.
  *Due Diligence:   Research and analysis conducted before beginning a project, including site inspections and feasibility studies.
  *Elevation:   A drawing that shows the exterior or interior vertical view of a structure from one side.
  *Excavation:   The process of digging, removing earth, and preparing the ground for a foundation or other structure.
  *Estimate:   A projection of the likely cost of a construction project, based on materials, labor, and other factors.
  *Facade:   The exterior face or front of a building, often focusing on its aesthetic design.
  *Finish:   Final materials and surfaces in construction, such as paint, tiles, flooring, and trim.
  *Footings:   The base that supports foundations, usually made of concrete, and spreads the weight of the structure to the ground.
  *General Contractor (GC):   The lead contractor responsible for managing a construction project, including hiring subcontractors and ordering materials.
  *Grade:   The level or slope of the ground on a construction site.
  *HVAC:   Heating, Ventilation, and Air Conditioning systems that regulate the climate within a building.
  *Hardscape:   Non-plant elements of landscaping, like walkways, patios, retaining walls, and decorative rock.
  *Inspection:   The examination of construction work by a qualified individual to ensure compliance with codes, plans, and specifications.
  *Insulation:   Material used to prevent heat transfer, enhancing a buildings energy efficiency.
  *Joist:   A horizontal structural member used in framing floors and ceilings, supporting loads between beams.
  *Kickoff Meeting:   An initial meeting to review project goals, schedules, and expectations among all parties involved.
  *Load-Bearing Wall:   A wall that supports the weight of the structure above it, requiring careful placement and reinforcement.
  *Lien:   A legal claim against a property for unpaid debts, often related to materials or labor.
  *Material Takeoff:   The process of listing all materials required for a project, often for the purpose of creating an estimate.
  *MEP:   Mechanical, Electrical, and Plumbing. These are essential systems within a building that require specialized design and installation.
  *Nail:   A slender metal pin used in construction for fastening materials together.
  *Notice to Proceed (NTP):   A formal notification from the client authorizing the contractor to begin work.
  *OSHA:   Occupational Safety and Health Administration, the U.S. agency overseeing workplace safety regulations.
  *Overhead:   Indirect project costs not directly related to construction labor or materials, such as administration and office expenses.
  *Permit:   Authorization from a government agency allowing the construction, modification, or demolition of a structure.
  *Punch List:   A list of items needing attention or correction before final project completion and handover.
  *Quality Assurance (QA):   Processes and procedures to ensure the construction meets required standards and specifications.
  *Quantity Surveyor:   A professional who manages all costs related to building projects, aiming to reduce expenses and keep within budget.
  *RFI (Request for Information):   A formal request used in construction to clarify project details, often between contractors and designers.
  *Retaining Wall:   A wall built to hold back earth or water, stabilizing slopes or embankments.
  *Schedule of Values:   A breakdown of the contract amount by individual work items or phases, used to track project progress and payments.
  *Scaffolding:   A temporary structure used to support workers and materials during construction or repair.
  *Site Plan:   A drawing showing the layout, topography, and features of a construction site, including utilities and access.
  *Tender:   A formal offer to complete a construction project, usually submitted in response to a request by the project owner.
  *Truss:   A structural framework, usually triangular, used to support roofs or bridges.
  *Underlayment:   Material placed between the subfloor and the finished floor, providing a smooth surface and/or insulation.
  *Utilities:   Essential services, like water, gas, and electricity, that are installed and connected to a building.
  *Value Engineering:   The process of analyzing a project to reduce costs without compromising quality or functionality.
  *Vapor Barrier:   A material used to resist the diffusion of moisture, often applied in walls, floors, or roofs.
  *Walkthrough:   An inspection of the construction site, often conducted to assess progress or identify issues.
  *Warranty:   A guarantee provided by the contractor or manufacturer for materials, workmanship, or equipment performance over a specific period.
  *Zoning:   Regulations governing land use, dictating how property can be developed or used in a particular area.
  *Zero Lot Line:   A building positioned close to or on the boundary line of a property, often maximizing usable space.
These terms provide a foundational understanding for construction professionals and advisors.